WAGO PFC100 User Manual

WAGO-I/O-SYSTEM 750 Commissioning 207
750-8100 PFC100; 2ETH; ECO
Manual
Version 1.6.0, valid from FW Version 03.02.02(14)
7.8.2.11.14 “Ports and Services” > “Modbus UDP” Submenu
This submenu contains the settings for the Modbus UDP service.
Table 168: “Ports and Services” > “Modbus UDP” Submenu
Menu Item
Submenu Item / Explanation
0. Back to …
Back to the higher-level menu
1. State
Disable/enable the Modbus UDP service.
0. Back to …
Back to the higher-level menu
1. Enable
The Modbus UDP service is enabled.
2. Disable
The Modbus UDP service is disabled.
2. Firewall status
Opens a submenu with firewall settings for the this
service for the interfaces
To make a selection, choose the appropriate menu item.
To return to the higher-level menu, press [Q].
7.8.2.11.15 “Ports and Services” > “OPC UA” Submenu
This submenu contains the settings for the OPC UA service.
Table 169: “Ports and Services” > “OPC UA” Submenu
Menu Item
Submenu Item / Explanation
0. Back to …
Back to the higher-level menu
1. State
Disable/enable the OPC UA service.
0. Back to …
Back to the higher-level menu
1. Enable
The OPC UA service is enabled.
2. Disable
The OPC UA service is disabled.
2. Firewall status
Opens a submenu with firewall settings for the this
service for the interfaces
To make a selection, choose the appropriate menu item.
To return to the higher-level menu, press [Q].

WAGO PFC100 Specifications

General

Brand	WAGO
Model	PFC100
Category	Controller
Language	English