WAGO PFC100 User Manual

146 Commissioning WAGO-I/O-SYSTEM 750
750-8100 PFC100; 2ETH; ECO
Manual
Version 1.6.0, valid from FW Version 03.02.02(14)
7.8.1.31 “Modbus Services Configuration” Page
The settings for various Modbus services are shown on the “Modbus Services
Configuration” page. The groups are only visible if the e!RUNTIME system is
enabled. Otherwise an information text is displayed.
7.8.1.31.1 “Modbus TCP” Group
Table 85: WBM “Modbus Services Configuration” Page – “Modbus TCP” Group
Parameter
Explanation
Service active
Disable or enable the Modbus/TCP service here.
Click the [Submit] button to apply the changes. The change is effective
immediately.
7.8.1.31.2 “Modbus UDP” Group
Table 86: WBM “Modbus Configuration Services” Page – “Modbus UDP” Group
Parameter
Explanation
Service active
Disable/enable the Modbus-UDP service here.
Click the [Submit] button to apply the changes. The change is effective
immediately.

WAGO PFC100 Specifications

General

Brand	WAGO
Model	PFC100
Category	Controller
Language	English