WAGO PFC100 User Manual

50 Function Description WAGO-I/O-SYSTEM 750
750-8100 PFC100; 2ETH; ECO
Manual
Version 1.6.0, valid from FW Version 03.02.02(14)
4.1.2.1.2 WBM User Group
WBM has its own user administration system. The users in this system are
isolated from the other user groups in the system for security reasons.
Detailed information about this is given in the Section “WBM User
Administration”.
Table 22: WBM Users
Users
Permissions
Default Password
admin
All (administrator)
wago
user
Supported to a limited extent
user
guest
Display only
---
Change passwords
Default passwords are documented in these instructions and therefore do not
offer adequate protection! Change the passwords to meet your particular needs.
4.1.2.1.3 Linux
®
User Group
The Linux
®
users group include the actual users of the operating system, which is
likewise used by most services.
The passwords for these users must be configured through a terminal connection
via SSH/RS-232.
Table 23: Linux
®
Users
User
Special Feature
Home Directory
Default Password
root
Super user
/root
wago
admin
CODESYS user
/home/admin
wago
user
Normal user
/home/user
user
Change passwords
Default passwords are documented in these instructions and therefore do not
offer adequate protection! Change the passwords to meet your particular needs.
4.1.2.1.4 SNMP User Group
The SNMP service manages its own users. In its initial state, no users are stored
in the system.

WAGO PFC100 Specifications

General

Brand	WAGO
Model	PFC100
Category	Controller
Language	English