40 Device Description WAGO-I/O-SYSTEM 750
750-8100 PFC100; 2ETH; ECO
Manual
Version 1.6.0, valid from FW Version 03.02.02(14)
3.6 Slot for Memory Card
Figure 13: MicroSD Card Slot
The microSD card is locked in the enclosure by a push/push mechanism.
Inserting and removing the card is described in the Section “Service” > “Inserting
and Removing the Memory Card”.
The microSD card is protected by a cover flap, which can also be sealed.
Memory card is not included in the scope of delivery!
Note, the controller is delivered without memory card.
To use a memory card, you must order one separately. The controller can also
be operated without memory card expansion, the use of a memory card is
optional.
Only use recommended memory cards!
Use only the microSD memory card available from WAGO (item No. 758-
879/000-3102) as it is suitable for industrial applications subjected to
environmental extremes and for use in this device.
Compatibility with other commercially available storage media cannot be
guaranteed.
To Next Page
Loading...
Need help?
General
