WAGO-I/O-SYSTEM 750 Commissioning 107
750-8100 PFC100; 2ETH; ECO
Manual
Version 1.6.0, valid from FW Version 03.02.02(14)
7.8.1.7.2 “Domain Name” Group
Table 40: WBM “Configuration of Host and Domain Name” Page – “Domain Name” Group
The domain name currently used is displayed.
It may differ from the configured domain name if you
have selected dynamic assignment of an IP address
via DHCP or BootP.
Enter the domain name.
The default entry is “localdomain.lan”.
Click [Submit] to apply the change. The change is effective immediately.
If a domain name is supplied via a DHCP response, this is enabled in the system.
If there are several network interfaces with DHCP, the last received domain name
is always valid.
If only the domain name configured here is to be valid, the configuration of the
DHCP server must be adapted so that no domain names are transferred in the
DHCP response.
To Next Page
Loading...
Need help?
General
