WAGO PFC100 - General Firewall Configuration Page; Global Firewall Parameters Group; Table 50: WBM General Firewall Configuration Page - Global Firewall

WAGO-I/O-SYSTEM 750 Commissioning 117
750-8100 PFC100; 2ETH; ECO
Manual
Version 1.6.0, valid from FW Version 03.02.02(14)
7.8.1.11 “General Firewall Configuration” Page
7.8.1.11.1 “Global Firewall Parameters” Group
Table 50: WBM “General Firewall Configuration” Page – “Global Firewall Parameters” Group
Parameters
Explanation
Firewall enabled entirely
Enables/disables the complete functionality of the
firewall. This setting has the highest priority. If the
firewall is disabled, all other settings have no direct
effect. The configuration of the other parameters is
possible nevertheless so that you can set the
firewall parameters correctly before you enable the
firewall.
ICMP echo broadcast
protection
Enable or disable the “ICMP echo broadcast”
protection.
Max. UDP connections per
second
You can specify the maximum number of UDP
connections per second.
Max. TCP connections per
second
You can specify the maximum number of TCP
connections per second.
Click [Submit] to apply the change. The change is effective immediately.