WAGO PFC100 User Manual

WAGO-I/O-SYSTEM 750 Commissioning 123
750-8100 PFC100; 2ETH; ECO
Manual
Version 1.6.0, valid from FW Version 03.02.02(14)
7.8.1.14 “Configuration of Time and Date” Page
The settings for date and time are shown on the “Configuration of Time and Date”
page.
7.8.1.14.1 “Date on Device” Group
Table 58: WBM “Configuration of Time and Date” Page – “Date on Device” Group
Parameters
Explanation
Local
Set date.
Click [Change date] to apply change. The change is effective immediately.
7.8.1.14.2 “Time on Device” Group
Table 59: WBM “Configuration of Time and Date” Page – “Time on Device” Group
Parameters
Explanation
Local
Set local time.
UTC
Set GMT time.
12 h format
For switching between 12-hour and 24-hour time
display
Click [Change time] to apply change to the time. The change is effective
immediately.
Click [Change format] to apply change to the time format. The change is
effective immediately.

WAGO PFC100 Specifications

General

Brand	WAGO
Model	PFC100
Category	Controller
Language	English