WAGO PFC100 - Figure 25: CBM - Selecting the IP Address; Figure 26: CBM - Entering a New IP Address

84 Commissioning WAGO-I/O-SYSTEM 750
750-8100 PFC100; 2ETH; ECO
Manual
Version 1.6.0, valid from FW Version 03.02.02(14)
9. In the menu TCP/IP Configuration select IP Address and press [Enter].
Figure 25: CBM – Selecting the IP Address
10. In the menu Change IP Address enter the new IP address and confirm by
clicking [OK]. If you want to return to the main menu without making
changes, click [Abort].
Figure 26: CBM – Entering a New IP Address