WAGO PFC100 - PLC Runtime Information Page; PLC Runtime Group; Table 36: WBM PLC Runtime Information Page - PLC Runtime Group

WAGO-I/O-SYSTEM 750 Commissioning 103
750-8100 PFC100; 2ETH; ECO
Manual
Version 1.6.0, valid from FW Version 03.02.02(14)
7.8.1.4 “PLC Runtime Information” Page
Information about the enabled runtime system and PLC program created in the
programming software is provided on the “PLC Runtime Information” page.
7.8.1.4.1 “PLC Runtime” Group
Table 36: WBM “PLC Runtime Information” Page – “PLC Runtime” Group
Parameter
Explanation
Version
The version of the currently enabled runtime system
is shown.
If the runtime system is disabled, “None” is
displayed.