WAGO PFC100 User Manual

WAGO-I/O-SYSTEM 750 Commissioning 147
750-8100 PFC100; 2ETH; ECO
Manual
Version 1.6.0, valid from FW Version 03.02.02(14)
7.8.1.32 “Configuration of Cloud Connectivity” Page
On the page “Configuration of Cloud Connectivity” you can find the settings and
information for cloud access.
Observe the additional documentation!
You can find a detailed description of the “Cloud Connectivity” software package
with a controller and information on PLC programming in Application Note
A500920 in the Downloads area at www.wago.com!
7.8.1.32.1 “Software Version” Group
Table 87: WBM “Configuration of Cloud Connectivity” Page – “Software Version” Group
Parameter
Explanation
Version
The cloud plug-in version is displayed.
7.8.1.32.2 “Status” Group
Table 88: WBM “Configuration of Cloud Connectivity” Page – “Status” Group
Parameter
Explanation
Operation
The status of the cloud connectivity application is
displayed here.
Data collections
This shows how many data collections have been
registered on the IEC application side for transfer to
the cloud.
Connection
The status of the connection to the cloud service is
shown here.
Heartbeat
This shows the current heartbeat interval setting in
seconds.
Telemetry data
transmission
This indicates whether transfer of data is enabled or
disabled.
Cache fill level
(QoS 1 and 2)
This shows the fill level of the memory cache for
outgoing messages as a percentage.

WAGO PFC100 Specifications

General

Brand	WAGO
Model	PFC100
Category	Controller
Language	English