4-8 Acquiring data
Auto Process
Samples
Processes acquired data (new or existing) as
specified in the Sample List Process column. See
“Verifying VSIR experimental resolution” on
page D-24
Auto Quantify
Samples
Quantifies the acquired data using the method
specified in the Quantify Samples dialog box.
Defaults to the current method if you do not specify
a different method in the Quantify Samples dialog
box.
Note: The previous three actions can run together or independently; i.e.,
you can acquire, process, and quantify data simultaneously, or acquire data
in one run and process or quantify it later.
From Sample The sample number of the first sample to be
acquired.
To Sample The sample number of the last sample to be
acquired.
Priority Marks a job as a priority process; placing it at the
top of the queue, to run after the current job.
Night Time Process Marks this entry as a night-time process. This
option is useful for time-consuming acquisitions that
would interrupt work on smaller acquisitions during
the day.
Pre-Run Runs the external executable process specified in
the adjacent text box, which performs
pre-processing on the samples.
Post-Run Runs the external executable process specified in
the adjacent text box, which performs
post-processing on the samples.
Note: Any *.exe file can be run, hence you can write your own applications
to perform a task before or after the batch is executed.
Start Sample List Run dialog box parameters (Continued)
Parameter Description
To Next Page
Loading...
