Spare parts 8-1
8 Troubleshooting
This chapter describes recommended troubleshooting procedures.
Spare parts
Waters recommends you replace only the parts mentioned in this document.
Safety and handling
When troubleshooting the Autospec Premier, keep the following safety
considerations in mind.
Contents
Topic Page
Spare parts 8-1
Safety and handling 8-1
System troubleshooting 8-2
Component hardware troubleshooting 8-2
Contacting Waters 8-6
Warning: To prevent injury, always observe good
laboratory practices when handling solvents, changing
tubing, or operating the Autospec Premier. Know the
physical and chemical properties of the solvents used (see
the Material Safety Data Sheets for the solvents in use).
Warning: To avoid electric shock, do not remove the
instrument’s panels. There are no user-serviceable items
inside the instrument.
To Next Page
Loading...
