Waters Autospec Premier - The Tune Window Edit Menu; The Tune Window Ion Mode Menu

The Tune window Edit menu D-3
To create a new instrument parameter file
Click File > New.
To open an existing instrument parameter file
1. Click File > Open.
2. In the Open dialog box, select the required instrument parameter file
(.ipr).
3. Click OK.
To save an instrument parameter file
Click File > Save.
Tip: This option is available only if you make changes to Tune window
parameters after opening the instrument parameter file.
To save an instrument parameter file to a new file name
1. Click File > Save As.
2. In the Save As dialog box, enter a file name for the new instrument
parameter file.
3. Click OK.
To print a report of the current Tune window
1. Click File > Print.
2. In Print dialog box, click OK.
The Tune window Edit menu
To copy an image of the peak display to the clipboard:
Click Edit > Copy.
The Tune window Ion Mode menu
Use the Ion Mode menu to select the required ionization mode and update the
Tune window’s Source tab to that mode.