The Tune window tuning controls D-31
The Tune window tuning controls
Use the five tuning control tabs to set the parameters used to tune the
instrument:
• Source.
•Lenses1.
•Lenses2.
•Inlets.
•AGHIS.
Tip: You can hide the tuning control tabs by clicking View > Tuning
Parameters. Click this option again to display the tuning control tabs.
The Source tab
The Source tab contains the controls for the instrument’s source parameters.
The contents of the Source tab vary, depending on the source you select by
clicking Ion Mode on the menu bar. The following sections detail the
parameters available in each Source tab.
To Next Page
Loading...
