D-30 The MassLynx Tune window
Edit > Copy Copies an image of the peak display onto
the clipboard.
Starts an acquisition.
Pauses the current acquisition. Click the
button again to restart the acquisition.
Stops the current acquisition.
Starts a tuning acquisition. Click the
button again to stop the tuning
acquisition.
Vacuum > Monitor Opens the Vacuum Monitor window,
which displays the Pirani and ionization
gauge outputs (in mbar) for the various
parts of the instrument.
Options > Instrument
Setup
Opens the Instrument Setup dialog box.
Options > Experiment
Calibration
Opens the Experiment Calibration dialog
box. to perform an experiment calibration
for use with Voltage SIR, MRM, MIKES
and NRMS experiments.
Options > Linked
Scanning Utility
Opens the Linked Scanning Utility dialog
box, to calculate ESA and Magnet Mass
values required to monitor specific
reactions in Linked Scanning mode.
Opens the AutoSpec AutoTune dialog box,
to start the AutoTune facility.
See “Using the AutoTune facility” on
page 2-19.
Toolbar buttons (Continued)
Tool Equivalent menu item Function
To Next Page
Loading...
