Ramping the probe temperature 6-19
To start the current probe ramping method
Click .
To stop the current probe ramping method
Click .
To pause the current probe ramping method
Click .
Probe Control dialog box’s Control tab displays
Display Description
Ramps Display Shows a graph of the current probe ramp against
time. Both the target value and actual value appear
to indicate how accurately the ramp profile is being
followed.
Probe State Displays the current state of the probe ramp.
Time Displays the current time, in minutes.
Value Displays the current ramp value, in units appropriate
to the probe type.
BP/TIC Displays the Base Peak or TIC intensity, as
appropriate.
To Next Page
Loading...
