Phaser 6000/6010 and WC 6015 MFP Xerox Internal Use Only 3-7
Error Messages and Codes
016-502 Write Flash Error
016-502 System
Contact Support
If Message Returns
<Download Error>
When downloading, error is
detected.
3-31
016-503
016-504
016-506
016-507
SMTP Error
016-50X Scan
Job Failure
Press OK
An E-mail Error has occurred. 3-32
016-718 Memory Full
016-718 Printer
Job too Large
Press OK
<Memory Over flow>
The current printing job process
cannot be continued because the
memory capacity is exceeded.
3-38
016-719 Decode Error
016-719 Printer
Job Failure
Press OK
<Decode error>
Decode error is detected.
3-39
016-720 PDL Request
016-720 Printer
Data Violation
Press OK
<PDL Error>
The print data cannot be processed
by PDL.
3-40
016-737 Format Error
Press OK Button
<Download Format Error>
The format is invalid.
3-35
016-741 Protection Error
Press OK Button
<Download Protect Error>
The Protect is invalid.Download
was attempted under the condition
where it is prohibited.
3-35
016-742 Invalid ID
Press OK Button
<Download ID Error>
An error occurred because an
invalid firmware is installed.
3-35
016-743 Range Chk Error
Press OK Button
<Download Range Error>
The address of the write
destination is invalid.
3-35
016-744 Format Error
016-744 System
Invalid Data
Press OK
<Download Format Error>
Invalid code to be downloaded.
3-35
016-745 Format Error
016-745 System
Invalid Data
Press OK
<Download Format Error>
Invalid code to be downloaded.
3-35
016-749 PJL Request
016-749 Printer
Data Violation
Press OK
<PJL Request Error>
The print data cannot be processed
by PJL.
3-37
016-764 Connect Fail
016-764 Scan
Job Failure
Press OK
<Connect Error>
Can not connect to mail server for
sending mail.
3-40
Error Message Summary (Continued)
Error
Code
Error Message LCD Error Description Go to
To Next Page
Loading...
Need help?
General
