Xerox PHASER 6010 - Registration

Phaser 6000/6010 and WC 6015 MFP Xerox Internal Use Only 5-55
Image Quality
Registration
•Leading Edge: ≤ ± 2.0 mm
•Side Edge: ≤ ± 2.5 mm
Note
The most common reason for registration to be out of specification is because
the paper guides are set incorrectly.
Registration
Registration = Measured Length - Nominal
Lead Edge
Nominal = 10.0 mm
(within ±2 mm)
Nominal = 8.5 mm
(within ±2.5 mm)
Left Edge
B
F