3-70 Xerox Internal Use Only Phaser 6000/6010 and WC 6015 MFP
Error Messages and Codes
NVRAM Error
Applicable Error
• 041-340: NVRAM Error
Initial Actions
• Cycle printer power.
• If the problem persists, use the following procedure.
Troubleshooting Reference Table
Applicable Parts Wiring and Plug/Jack Map References
■ MCU Board, PL7.2.2 ■ “Map 3 - Phaser 6000/6010” on
page 10-9
■ “Phaser 6000/6010 System Wiring” on
page 10-10
■ “Map 3 - WorkCentre 6015 MFP” on
page 10-23
■ “WorkCentre 6015 MFP System Wiring”
on page 10-24
Troubleshooting Procedure Table
Step Actions and Questions Yes No
1 Perform the Electrical Noise test
(page 4-66).
Does the error persist?
Go to step 2. Complete.
2 Replace the MCU Board
(page 8-121).
Does the error persist when the
power is turned on?
Contact your
designated
field support for
assistance.
Complete.
To Next Page
Loading...
