Xerox PHASER 6010 - Hunting

5-36 Xerox Internal Use Only Phaser 6000/6010 and WC 6015 MFP
Image Quality
Hunting
The printed image has wavy column line in the direction of the paper travel.
Initial Actions
• Check the ADF media path for dirt or debris.
• Check the ADF media transport components.
Troubleshooting Reference Table
Applicable Parts Example Print
■ ADF Assembly, PL8.1.2
■ IIT Assembly, PL8.1.8
Troubleshooting Procedure Table
Step Actions and Questions Yes No
1 Check the media being used and its
condition.
Is the media dry and
recommended?
Go to step 3. Replace with
dry, approved
media, then go
to step 2.
2 Does the image print correctly? Complete. Go to step 3.
3 Replace the ADF Assembly
(page 8-37).
Does the error persist?
Replace the IIT
Assembly
(page 8-35).
Complete.
Hunting