Xerox PHASER 6010 Service Manual

1-20 Xerox Internal Use Only Phaser 6000/6010 and WC 6015 MFP
General Information
Fax Specifications (WorkCentre 6015N/NI Color MFP)
Platen
Document Setting Reference
Position
Left rear corner as viewed from printer front.
Document Glass Size 220 mm x 300 mm (8.66 in. x 11.8 in) (Flat
glass area)
ADF
Resolution (Line Density in Fast
Scan Direction)
1200 dots/25.4 mm (1200 dots/1 inch)
Document Thickness
60 g/m
2
to 105 g/m
2
Capacity 15 sheets (plain paper)
Fax Specifications
Characteristic Specifications
Communication Mode Priority 1: ITU-T Super G3
Priority 2: ITU-T G3 ECM
Priority 3: ITU-T G3
Direct Fax Supported
Facsimile Communication
Network (FAX NET)
Not supported
Fax Send/Receive Buffer 2 MB
Supported Network PSTN, PBX
NOTE The printer can not be connected to an ISDN
network.
Supported Protocols ■ V. 34 (Max.33.6 kbps)
■ V. 17 (14.4/12/9.6/7.2 kbps)
■ V. 29 (9.6/7.2 kbps)
■ V. 27ter (4.8/2.4 kbps)
Transfer If the machine cannot print received FAX data
because of printer trouble, or when the user
specifies transfer of received data, received
data is automatically sent to a pre-registered
machine.
Settings: OFF, Forward only, or Print & Forward.
Walk-up Fax
Incoming Call Control Telephone Mode, Auto Receive, iFax, Tel/Fax,
Ans/Fax, DRPD
Color Fax Not supported
Resolution Standard, Fine, Super Fine, and Ultra Fine
Scanning Specifications (Continued)
Characteristic Specifications

Xerox PHASER 6010 Specifications

General

Print Technology	Laser
Print Speed	Up to 12 ppm color / 15 ppm black
Print Resolution	1200 x 2400 dpi
Monthly Duty Cycle	Up to 30, 000 pages
Standard Paper Capacity	150 sheets
Memory	128 MB
Paper Output Capacity	100 sheets
Duplex Printing	Manual
Maximum Paper Capacity	150 sheets
Supported Operating Systems	Windows, Mac OS, Linux
Connectivity	USB 2.0
Weight	24.3 lbs