Xerox PHASER 6010 - XERO Near Life

3-94 Xerox Internal Use Only Phaser 6000/6010 and WC 6015 MFP
Error Messages and Codes
XERO Near Life
The xerographics assembly is approaching end of life.
Applicable Error
• 091-402: XERO Near Life
Initial Actions
• Cycle printer power.
• If the problem persists, use the following procedure.
Troubleshooting Reference Table
Applicable Parts Wiring and Plug/Jack Map References
■ MCU Board, PL7.2.2 ■ “Map 3 - Phaser 6000/6010” on
page 10-9
■ “Phaser 6000/6010 Xerographics” on
page 10-14
■ “Map 3 - WorkCentre 6015 MFP” on
page 10-23
■ “WorkCentre 6015 MFP Xerographics”
on page 10-28
Troubleshooting Procedure Table
Step Actions and Questions Yes No
1 Turn the printer off and then on.
Does the error persist?
Replace the
MCU Board
(page 8-121).
Complete.
2 Does the error persist? Contact your
designated
field support for
assistance.
Complete.