Xerox PHASER 6010 - Pitched Color Dots

5-20 Xerox Internal Use Only Phaser 6000/6010 and WC 6015 MFP
Image Quality
Pitched Color Dots
There are recurring color dots on the page.
Initial Actions
• Check the paper transfer path.
• Ensure there is no debris on the transfer path.
Troubleshooting Reference Table
Applicable Parts Example Print
■ Transfer Roller, PL1.1.9
■ Fuser, PL5.1.1
Troubleshooting Procedure Table
Step Actions and Questions Yes No
1 Measure the pitch.
Does the pitch match any of the
pitches shown in the Repeating
Defects Table? See page 5-3.
Replace the
corresponding
parts.
Contact your
designated
field support for
assistance.
Re
p
eatin
g
Defect
,
Develo
p
er Roller