Phaser 6000/6010 and WC 6015 MFP Xerox Internal Use Only 3-97
Error Messages and Codes
ENV Sensor Error
An error occurred while reading the Humidity Sensor.
Applicable Error
• 092-661: Env Sensor Error
Initial Actions
• Cycle printer power.
• If the problem persists, use the following procedure
Troubleshooting Reference Table
Applicable Parts Wiring and Plug/Jack Map References
■ MCU Board, PL7.2.2 ■ “Map 3 - Phaser 6000/6010” on
page 10-9
■ “Phaser 6000/6010 Fuser” on
page 10-17
■ “Map 3 - WorkCentre 6015 MFP” on
page 10-23
■ “WorkCentre 6015 MFP Fuser” on
page 10-31
Troubleshooting Procedure Table
Step Actions and Questions Yes No
1 Replace the MCU Board
(page 8-121).
Does the error persist when the
power is turned off and on?
Contact your
designated
field support for
assistance.
Complete.
To Next Page
Loading...
