Xerox PHASER 6010 - Wi-Fi Assembly

Phaser 6000/6010 and WC 6015 MFP Xerox Internal Use Only 8-103
Service Parts Disassembly
Wi-Fi Assembly
PL1.1.32
Note
This procedure applies to the WorkCentre 6015NI Color MFP.
1. Remove the Main Paper Tray Cover (page 8-29).
2. Open the Scanner Assembly.
3. Remove the Output Tray Extension (page 8-31).
4. Open the Toner Door.
5. Remove the Front Cover (page 8-34).
6. Remove the Left Side Cover (page 8-29).
7. Disconnect P/J12 on the IP Board and unlace the harness.
8. Release the two clips and remove the Wi-Fi Assembly.
s6015-113