5-22 Xerox Internal Use Only Phaser 6000/6010 and WC 6015 MFP
Image Quality
Residual Image or Ghosting
There are faint, ghostly images appearing on the page. The images may be either
from a previous page or from the page currently being printed.
Initial Actions
• Check the paper transfer path.
• Ensure there is no debris on the transfer path.
Troubleshooting Reference Table
Applicable Parts Example Print
■ Transfer Roller, PL1.1.9
■ Fuser, PL5.1.1
Troubleshooting Procedure Table
Step Actions and Questions Yes No
1 Replace the Transfer Roller
(page 8-14).
Does the image print correctly?
Complete. Go to step 2.
2 Replace the Fuser (page 8-80).
Warning: Allow the Fuser to cool
before replacing.
Complete.
Residual Image/Ghosting
To Next Page
Loading...
