Phaser 6000/6010 and WC 6015 MFP Xerox Internal Use Only 5-15
Image Quality
Blank Print
The entire image area is blank.
Initial Actions
• Ensure there is no debris in the transfer path.
Troubleshooting Reference Table
Applicable Parts Example Print
■ Transfer Roller, PL1.1.9
Troubleshooting Procedure Table
Step Actions and Questions Yes No
1 Check media condition.
Is the media dry and
recommended?
Go to step 3. Replace the
media, then go
to step 2.
2 Does the image print correctly? Complete. Go to step 3.
3 Reseat and lock the Toner
Cartridges.
Does the image print correctly?
Complete. Go to step 4.
4 Replace the Transfer Roller.
Does the error persist?
Contact your
designated
field support for
assistance.
Complete.
To Next Page
Loading...
