7-10 Xerox Internal Use Only Phaser 6000/6010 and WC 6015 MFP
Cleaning and Maintenance
• Do not tilt the printer more than 10 degrees to the front or back, or left or
right. Tilting the printer more than 10 degrees may cause toner spillage.
Failure to properly repackage the printer for shipment can result in damage
not covered by the warranty, Service Agreement, or Total Satisfaction
Guarantee.
After moving the printer:
1. Reinstall any parts you removed.
2. Reconnect the printer to the cables and power cord.
3. Plug in and turn On the printer.
4. Adjust the color registration before using the printer.
s6000-185
10° or 7 mm
10° or 7 mm
To Next Page
Loading...
