Phaser 6000/6010 and WC 6015 MFP Xerox Internal Use Only 8-69
Service Parts Disassembly
13. Disconnect P/J201 on the LVPS and release the harness from the harness
guide.
14. Remove the 5 screws (silver, tap, 8 mm), and remove the toner dispense frame
from the printer.
15. Remove the MCU Board (page 8-121).
16. Remove the HVPS (page 8-123).
17. Remove the LED Driver Board (page 8-107).
18. Remove the Feed Drive Assembly (page 8-91).
19. Remove the Main Drive Assembly (page 8-82).
20. Remove the Developer Drive Assembly (page 8-95).
To Next Page
Loading...
