Xerox PHASER 6010 Service Manual

A-12 Xerox Internal Use Only Phaser 6000/6010 and WC 6015 MFP
Reference
EXIT SNR 1. Remove the Top Cover (Phaser 6000/6010 page 8-11;
WorkCentre 6015 MFP page 8-22).
2. Power on the printer, and start the CE Diag Tool.
3. Select the EXIT SNR test, and click the OK button.
4. Manually operate the actuator to check whether the sensor
functions properly.
5. Click the Stop button to stop the test.
Test example:
[23:58]
Digital Input Mode = ENTRY
[23:58]
EXIT SNR = LOW
STARTED = EXIT SNR
[23:58
EXIT SNR = HIGH
STARTED = EXIT SNR
[23:58]
EXIT SNR = LOW
STARTED = EXIT SNR
[23:58]
Digital Input Mode = EXIT
Test Procedure
Paper
s6000-143
Exit Sensor Actuator
Paper

Xerox PHASER 6010 Specifications

General

Print Technology	Laser
Print Speed	Up to 12 ppm color / 15 ppm black
Print Resolution	1200 x 2400 dpi
Monthly Duty Cycle	Up to 30, 000 pages
Standard Paper Capacity	150 sheets
Memory	128 MB
Paper Output Capacity	100 sheets
Duplex Printing	Manual
Maximum Paper Capacity	150 sheets
Supported Operating Systems	Windows, Mac OS, Linux
Connectivity	USB 2.0
Weight	24.3 lbs