The Stock Library list displays stocks that are specific to the press. The user selects a stock from
the list, and that stock is assigned to the tray. For more information, refer to Accessing the Stock
Library from Tray Properties.
The Tray Stock Properties window includes the following settings:
Enable Tray
Permits the selected tray to be used.
Disable Tray
Prohibits the selected tray from being used.
Long Edge Feed
Indicates that the paper in the tray is loaded in the Long Edge Feed (LEF) direction.
Short Edge Feed
Indicates that the paper in the tray is loaded in the Short Edge Feed (SEF) direction.
Alignment Profile
Allows the user to select the system default profile or a specific profile that was created and saved
from the Profiles feature. Select one of the following:
• Apply to stock: This option uses a specific alignment profile for the stock. This option does not
apply the profile to the tray.
Note: This is the system default option.
• Apply to tray: This option uses a specific alignment profile for the tray only and not the stock
loaded in it. The Apply to tray field shows either Default Profile or a selected profile.
• Select Profile: Select this option to open the Select Alignment Profile window and choose a
previously saved profile that can be applied to the selected tray.
For detailed information and instructions, refer to Alignment Profiles.
Override
• If the Override checkbox is cleared, when the current media loaded in the tray does not match
the media information on the Tray Stock Properties window, a message appears.. Load the
tray with the same media that is indicated on the Tray Stock Properties window.
• If the check box is selected, when there is a media mismatch between the actual tray contents
and the information shown on the Tray Stock Properties window for that tray, a message
never appears.
Cancel
Select this option to close the Tray Stock Properties window without making any changes.
OK
Select this option to save any changes made and close the Tray Stock Properties window.
AAcccceessssiinngg TTrraayy PPrrooppeerrttiieess
1. Select a tray from the PredictPrint Media Manager main window.
The Tray Stock Properties window opens.
114
Xerox
®
Versant
®
4100 Press
User Documentation
Working With
To Next Page
Loading...
