Xerox Versant 4100 Press - Trays 8 and 9 Troubleshooting; Paper Jams in Trays 8 and 9; Paper Jams When the Bypass is Installed on Trays 8 and 9

Trays 8 and 9 Troubleshooting
TTrraayyss 88 aanndd 99 TTrroouubblleesshhoooottiinngg
PPaappeerr JJaammss iinn TTrraayyss 88 aanndd 99
Paper Jams When the Bypass is Installed on Trays 8 and 9
Tip: Always ensure that all paper jams, including any small, ripped pieces of paper, are cleared
before proceeding with any print jobs.
1. Remove the paper currently loaded in the Bypass (Tray 5).
2. Lift and open the Top Cover of the Bypass (Tray 5).
3. Remove any jammed paper.
Note: If paper is torn, check inside the press and remove it.
Xerox
®
Versant
®
4100 Press
User Documentation
347
Troubleshooting