Xerox Versant 4100 Press - Reinserting the Basic Staple Cartridge

Reinserting the Basic Staple Cartridge
If a staple cartridge has been inserted incorrectly or accidentally removed, perform the following
procedure to correctly reinsert the staple cartridge into the cartridge unit.
1. Open the finisher front cover.
2. Pull out R1.
3. Open the unit cover and remove the jammed staples.
WARNING: To avoid personal injury, use care when removing jammed staples.
Xerox
®
Versant
®
4100 Press
User Documentation
413
Troubleshooting