4. Fan the sheets before loading them into the tray.
5. Extend the paper guides outward until they stop.
6. Load and align the edge of the paper against the right edge of the tray.
Paper can be loaded in the LEF or portrait, or SEF or landscape direction.
7. Adjust the paper guides by pressing in the guide releases and carefully moving the guides until
they lightly touch the edges of the material in the tray.
Note: Do not load materials above the MAX line located on the guides.
8. Gently push in the tray until it comes to a stop.
The Stock Wizard opens on the print server.
9. Scan the barcode on the stock, then to set up the stock, follow the steps in the Stock Wizard.
Note: For details on setting up the stock in the Stock Wizard, refer to Scanning a Media
Barcode.
PPaappeerr FFeeeedd PPeerrffoorrmmaannccee iinn TTrraayyss 88 aanndd 99
If misregistration or skew occurs on printed output that was fed from Trays 8 or 9, manual
adjustment of the paper-feed levers may improve and correct the printed output.
Xerox
®
Versant
®
4100 Press
User Documentation
167
Working With
To Next Page
Loading...
