Item
Specification
Paper weight Uncoated 52–300 g/m
2
Coated 52–300 g/m
2
Staple Output Capacity
Paper weight
(g/m
2
)
Side Stitch Saddle Stitch
A4 or smaller
Larger than A4
Uncoated Coated
Un-
coated Coated Uncoated Coated
52–59 100 35* 65 35* 30* 25*
60–71 30
72–80 35 35 25
81–90
91–105 50 30 50 30 20
106–128 45 15
129–150 20 20 20 20 10
151–176
177–220 5
221–256 4
257–300 10 10 10 10 3
301 - 350
* Can be stapled; however, binding accuracy or paper feed performance cannot be guaranteed.
Values in the table indicating the maximum number of sheets that can be stapled have been evaluated using
the following paper types: 82 g/m
2
, Colotech+ (200 g/m
2
, 250 g/m
2
, 350 g/m
2
).
Even for a print job whose number of pages is within the limit, staple faults can occur depending on
the following conditions:
• Type of paper, such as Gloss Coated Paper
• Environment where the press is installed, such as room temperature, humidity, and others
• Print data, even if you use recommended paper types
• The job is made of a mixture of paper type or paper weight
Important: In an environment at a low temperature and low humidity, stapling of 40 sheets or
more can cause paper jams.
Note: The press determines paper type and paper weight based on paper information set for
the job, not based on paper actually loaded in the tray. The press determines the number of
sheets per job based on job information. Therefore, when multifeeds occur, stapling can be
performed even if the number of sheets being fed exceeds the limit. However, this can cause
staple faults.
212
Xerox
®
Versant
®
4100 Press
User Documentation
Working With
To Next Page
Loading...
