Xerox Versant 4100 Press - Bi-Fold Single Sheet Adjustment Procedure

• Bi-Fold Single Sheet Adjustment Procedure
• Bi-Fold Multiple Sheets Adjustment Procedure
• Bi-Fold Multiple Sheets Stapled Adjustment Procedure
• C-Fold Adjustment Procedure
• Z-Fold Adjustment Procedure
• Z-Fold Half-Sheet Adjustment Procedure
Bi-Fold Single Sheet Adjustment Procedure
Note: The Bi-Fold Multiple Sheets Adjustment feature is available with an optional Production
Ready Booklet Maker Finisher.
1. From the PredictPrint Media Manager main window, select Profiles.
The Profiles window appears.
2. Select the Fold Adjustment tab.
The Fold Adjustment option appears.
3. Select either the New or Edit button.
If you edit an existing fold adjustment, select the desired profile from the list and then select the
Edit button.
The [New or Existing] Profile Properties window opens.
4. Type in a new name, or if needed, edit the existing name.
It is recommend that you use a name such as Single Fold Plain or something that indicates
the fold type.
5. From the drop-down menu, select the Bi-Fold Single Sheet Fold Type.
6. Select desired settings such as Size, Coating, and Weight.
7. Select the Test Print button.
The Fold Adjustment - Test Print window appears.
8. For the Trim option, ensure that Off is selected.
Note: The Trim selection is available only when the press is connected to an optional
booklet maker finisher and an optional trimmer device.
9. Select the desired tray, and then select the Start button.
After the test prints complete, the [New or Existing] Profile Properties window reopens.
10. Obtain the printed samples from the output area of the press.
11. Measure the sample output and record the bi-fold position on a sheet of paper.
Xerox
®
Versant
®
4100 Press
User Documentation
147
Working With