Xerox Versant 4100 Press - Status Lights

Item Number Name
Description
Power Saver mode). This button manually
exits the system from Power Saver mode; it
does not place the press in Energy Save
mode.
9 Numeric Keypad Use to enter alphanumeric characters. The
‘C’ Cancel Entry cancels the previous entry
made on the numeric keypad.
10 Cancel Entry button Use this button to cancel the previous entry
made on the numeric keypad.
11 Clear All button Use this button to return all selections to the
same state as when the press was powered
on. Press once to clear a current entry. Press
twice to return to default settings.
12 Stop button Press to stop and pause the print job in
progress.
13 Start button Press to start and print a selected report. Also
used by the Customer Service Engineer
during diagnostic routine procedures.
14 Press Status Lights The three indicator lights that identify: data
transmission in progress, the press is
experiencing an error, and main power is on.
Status Lights
There are three status lights on the press directly below the Control Panel. From right to left, they are:
22
Xerox
®
Versant
®
4100 Press
User Documentation
Learning About