Xerox Versant 4100 Press - Power On or Off; Power Switches; Circuit Breaker Switch; Main Power Switch

Power On or Off
PPoowweerr SSwwiittcchheess
There are three power switches involved with the press:
• Circuit Breaker Switch
• Main Power Switch
• Power Button
Important: To power off, always press the power button first. Wait until the lights on the user
interface stop blinking, to allow the fuser to finish cooling. Move the main power switch to the
off position.
CCiirrccuuiitt BBrreeaakkeerr SSwwiittcchh
The Circuit Breaker Switch located at the rear of the press. Initially check to make sure this switch is
set to On when the press is shipped.
MMaaiinn PPoowweerr SSwwiittcchh
The Main Power Switch located inside the Center Front Door.
Note: Switching off the Main Power also shuts off the Main Power Status LED.
42
Xerox
®
Versant
®
4100 Press
User Documentation
Working With