Maintenance
GGeenneerraall PPrreeccaauuttiioonnss aanndd WWaarrnniinnggss
WARNING: Precision components and high-voltage power supplies are used on the press:
• Never open or remove covers that are screwed shut unless specifically instructed in the User
Guide.
• A high-voltage component can cause electric shocks.
• When opening the panels and covers that are screwed shut to install or detach optional
accessories, be sure to follow instructions in the User Guide.
• Do not try to alter the press configuration or modify any parts; doing so might cause press
malfunction or fire.
Caution:
• Do not place the equipment where people may step or trip on the power cord.
• Do not place objects on the power cord.
• Do not override or disable electrical or mechanical interlocks.
• Do not obstruct the ventilation openings. These openings prevent overheating of the
equipment.
• Never push objects of any kind into slots or openings on this equipment. Making a contact
with a voltage point or shorting out a part may result in fire or electrical shock.
• Use the materials and supplies specifically designed for your equipment. The use of
unsuitable materials may result in poor performance of the equipment and possibly a
hazardous situation.
• Follow all warnings and instructions that are marked on or supplied with the equpiment.
• Do not block or cover the slots and openings on the equipment.
• Do not attempt to override any electrical or mechanical interlock devices.
CClleeaanniinngg tthhee PPrreessss
Read and adhere to the following information when cleaning the press:
• Before you start to clean the press, be sure to switch off the power using the circuit breaker switch
and unplug the press.
WARNING: Cleaning the press without switching off the power may cause an electric
shock.
• Always use a dry lint-free cloth for all cleaning actions unless otherwise directed.
Caution: Do not use benzene, paint thinner, other volatile liquids, or spray insect
repellent on the press as doing so may discolor, deform, or crack covers.
• If a moistened cloth is used, wipe afterwards with a dry lint-free cloth.
232
Xerox
®
Versant
®
4100 Press
User Documentation
Working With
To Next Page
Loading...
