Xerox Versant 4100 Press - Finishing Devices Maintenance; Crease and Two-Sided Trimmer Maintenance; Emptying the Crease and Two-Sided Trimmer Waste Container

FFiinniisshhiinngg DDeevviicceess MMaaiinntteennaannccee
CCrreeaassee aanndd TTwwoo--SSiiddeedd TTrriimmmmeerr MMaaiinntteennaannccee
Emptying the Crease and Two-Sided Trimmer Waste Container
When the trimmer waste container is nearing the full condition, an indicator lights on the top of the
Crease and Two-Sided Trimmer.
Note: The waste container can be emptied before it is full and also while the printer is running.
When the waste container reaches the full condition, the following changes occurs:
• The indicator changes from a steady lighted condition to blinking.
• A message appears on the press indicating that the waste container is full.
Perform the following steps to empty the trimmer waste container.
1. Open the lower cover of the Crease and Two-Sided Trimmer.
Xerox
®
Versant
®
4100 Press
User Documentation
271
Working With