Xerox Versant 4100 Press - Full System Configuration

2. Select the desired language from the list and select Save.
The language on the screen changes to the new language and closes the Language window.
3. Select the Cancel button to return to the main screen.
FFuullll SSyysstteemm CCoonnffiigguurraattiioonn
Note: Full system configurations will vary depending on which optional devices are attached to
the press. For detailed information about an optional device, refer to the appropriate device
chapter in this guide.
The following illustration shows an example of a full system configuration with optional devices
attached. This is only one example.
1. Dual Advanced Oversized High Capacity
Feeder (Trays 8 and 9)*
2. Advanced Oversized High Capacity Feeder
(Trays 6 and 7), with Tray 5 (Bypass)
3. Press
4. Interface Decurler Module (IDM)*
5. Inserter*
6. High Capacity Stacker*
7. Crease and Two-sided Trimmer*
8. C/Z Folder*
9. Production Ready (PR) Booklet Maker
Finisher*
10. SquareFold
®
Trimmer*
* Numbers 1 and 4-10 indicate optional devices.
24
Xerox
®
Versant
®
4100 Press
User Documentation
Learning About