7. Adjust the paper guides by pressing in the guide releases and carefully moving the guides until
they lightly touch the edges of the material in the tray.
Note: Do not load materials above the MAX line located on the guides.
8. Gently push in the tray until it comes to a stop.
The Stock Wizard opens on the print server.
9. Scan the barcode on the stock, then to set up the stock, follow the steps in the Stock Wizard.
Note: For details on setting up the stock in the Stock Wizard, refer to Scanning a Media
Barcode.
LLooaaddiinngg PPaappeerr iinn TTrraayyss 66 aanndd 77
1. Select the appropriate paper stock for your print job.
2. Pull out the tray slowly until it stops.
3. Open the ream of paper with the seam side facing up.
4. Fan the sheets before loading them into the tray.
5. Extend the paper guides outward until they stop.
Xerox
®
Versant
®
4100 Press
User Documentation
61
Working With
To Next Page
Loading...
