Xerox Versant 4100 Press - PR Finisher Plus Maintenance

1. Open the finisher front cover.
2. Pull out the R4.
3. Discard all waste from the container.
Important: Be sure to completely empty the container. If any waste or scraps remain, the
container becomes full before a full message displays causing a fault to occur.
4. Return R4 to its original position.
5. Close the finisher front cover.
PPRR FFiinniisshheerr PPlluuss MMaaiinntteennaannccee
For information on consumable supplies and maintenance procedures for the PR Finisher Plus, refer to
the following:
Xerox
®
Versant
®
4100 Press
User Documentation
281
Working With