Xerox Versant 4100 Press - Loading Paper; Loading Paper in Trays 1, 2, and 3

LLooaaddiinngg PPaappeerr
LLooaaddiinngg PPaappeerr iinn TTrraayyss 11,, 22,, aanndd 33
Note: A paper jam may occur if a tray is opened while it is being used to feed stock.
1. Select the appropriate paper stock for your print job.
2. Pull out the tray slowly until it stops.
3. Open the ream of paper with the seam side facing up.
4. Fan the sheets before loading them into the tray.
5. Extend the paper guides outward until they stop.
6. Load and align the edge of the paper against the left edge of the tray.
Paper can be loaded in the LEF or portrait, or SEF or landscape direction.
60
Xerox
®
Versant
®
4100 Press
User Documentation
Working With