13. When desired output is achieved, select OK to save and close the Fold Adjustment Profile.
Note: After multiple attempts, if acceptable output cannot be achieved, select OK to save
and close the profile. For further assistance, contact the Customer Support Center.
CCrreeaassee AAddjjuussttmmeennttss
Tip: The Crease Adjustment feature is available only when the press is connected to a Crease
and Two-Sided Trimmer device.
The Fold Adjustment feature allows you to adjust the crease position for various paper types. The
Crease Adjustment feature also helps minimize dry ink/toner peel and provides a smoother fold
edge.
Note: Access the Crease Adjustment feature from the Fold Adjustment tab of the Profiles
window.
Crease Types
Crease Types and Adjustments: The following types of creasing are available with the optional Crease
and Two-Sided Trimmer module installed.
Note: The A, B, and C designations on the images indicate the corresponding crease position
length adjustments that you can make.
Crease - Bi-Fold Single Sheet
A Bi-Fold has one crease which creates two panels to the output.
Crease - C-Fold
Xerox
®
Versant
®
4100 Press
User Documentation
155
Working With
To Next Page
Loading...
