• Store paper flat on pallets, cartons, shelves, or in cabinets.
• Avoid food or drinks in the area where paper is stored or handled.
• Do not open sealed packages of paper until you are ready to load the paper into the trays. Leave
stored paper in the original packaging. The paper wrapper protects the paper from moisture loss
or gain.
• Some special media is packaged inside resealable plastic bags. Store the media inside the bag
until you are ready to use it. Keep unused media in the bag and reseal it for protection.
SSuuppppoorrtteedd PPaappeerr
Paper Specifications for Trays 8 and 9
For information on paper tray specifications, refer to Paper Specifications for All Trays.
Note: Always refer to the Recommended Media List (RML) or Tested Substrate List (TSL) for a
comprehensive list of supported media. You can access the latest RML or TSL version from
www.xerox.com and https://www.xerox.com/predictprintmedia.
Paper Size Ranges for Trays 8 and 9
Minimum Size Maximum Size
98 x 146 mm (3.86 x 5.75 in.) 330.2 x 488 mm (13 x 19.2 in.)
Paper Tray Information for Trays 8 and 9
Note: Each feeder tray has a stock loading label. When loading media into the tray, refer to the
labels on the inside panel of the feeder tray for the correct orientation of that stock type.
The specifications for each tray are:
• Maximum of 2000 sheets of 24 lb. (90 g/m
2
) uncoated paper; 2100 sheets of 82 g/m
2
and 2300
sheets of 64 g/m
2
• Paper weight range of 52–400 g/m
2
• Stock types include transparencies, heavyweight, coated and uncoated, hole-punched, and tabs
LLooaaddiinngg PPaappeerr iinn TTrraayyss 88 aanndd 99
1. Select the appropriate paper stock for your print job.
2. Pull out the tray slowly until it stops.
3. Open the ream of paper with the seam side facing up.
166
Xerox
®
Versant
®
4100 Press
User Documentation
Working With
To Next Page
Loading...
