SSqquuaarreeFFoolldd
®®
TTrriimmmmeerr DDeevviiccee
Note: This optional finishing device requires the Interface Decurler Module.
Tip: SquareFold
®
Trimmer device is available only with booklet maker finisher.
The SquareFold
®
Trimmer device is an optional finishing device that flattens the spine of a booklet
and performs face trim of the booklet.
The SquareFold
®
Trimmer device:
• Receives the booklet from the booklet maker area of the finisher.
• Flattens the booklet spine, thereby reducing the booklet thickness and giving it the appearance of
a perfect-bound book.
• Trims and cuts away the face edge of the booklet, resulting in a neat finished edge.
The booklet is assembled and stapled in the booklet area of the finisher. The booklet then enters the
SquareFold
®
Trimmer device already assembled. Any adjustments to the image of the original and its
placement on the booklet page must be set at the print server.
SSqquuaarreeFFoolldd
®®
TTrriimmmmeerr CCoommppoonneennttss
Xerox
®
Versant
®
4100 Press
User Documentation
213
Working With
To Next Page
Loading...
