Xerox Versant 4100 Press - Advanced Stock Setup in the Stock Wizard

5. From a browser on an Internet-connected device, go to https://www.xerox.com/predictprintmedia.
The PredictPrint Media Manager opens. Click Get New Barcode.
6. Upload the stock file from the USB storage device to the PredictPrint Cloud Server. The
PredictPrint Cloud Server generates a new barcode with stock setup routines. Save the setup and
barcode information to the USB storage device.
7. Ensure that the tray is loaded with the stock for which you need a barcode.
8. Insert the USB storage device into a USB port on the Fiery Print Server. On the Stock Wizard
Setup screen, click Load Barcode File.
9. From the USB storage device, copy the file with stock setups and the barcode information to the
PredictPrint Media Manager application. Click Next.
A barcode appears on the next screen.
10. To print the barcode, click Print Barcode.
11. To scan the barcode as needed in the future, keep the printed barcode for reference.
12. Click Accept and Next.
The Stock Wizard starts the series of automatic setup routines.
AAddvvaanncceedd SSttoocckk SSeettuupp iinn tthhee SSttoocckk WWiizzaarrdd
On the Advanced screen, the PredictPrint Stock Wizard guides you through a series of advanced
settings that include semi-automatic and automatic setup routines.
For any semi-automatic setup routine, you can print a sample, inspect the sample, and make
adjustments, if needed. The semi-automatic setup routines include:
• Advanced Alignment for Multiple Profiles
• Trail Edge Transfer Output Adjustment
• Aligner Roll Pressure Adjustment
• Paper Speed Transfer Adjustment
• Fuser Temperature Adjustment
• Regi-Loop Adjustment
• Pre Gate Roll Control
• Tray Air Assist Adjustment
• Tray Heater Adjustment
The automatic setup includes Calibration and Profiling. If there are no semi-automatic setup routines
to run, the Calibration and Profiling process is done on the Setup screen. If there are semi-automatic
setup routines recommended for the stock, the Calibration and Profiling process is done on the
Advanced screen. For more information, refer to Calibration and Profiling.
1. To view the instructions about adjusting a specific semi-automatic setup routine, click Get
Instructions. For more information, refer to Advanced Stock Setup Options.
2. To verify the printed output, click Print Sample. Make adjustments to the setup routine, as
needed.
96
Xerox
®
Versant
®
4100 Press
User Documentation
Working With