review the entire Fold Adjustments section in the PredictPrint Media Manager.
• Depending on your system configuration, the following fold adjustments are available:
– Bi-Fold Single Sheet (available only with the PR Booklet Maker Finisher)
– Bi-Fold Multiple Sheets (available only with the PR Booklet Maker Finisher)
– Bi-Fold Multiple Sheets Stapled (available only with the PR Booklet Maker Finisher)
– C-Fold (available with the optional C/Z Folder)
– Z-Fold (available with the optional C/Z Folder)
– Z-Fold Half-Sheet (available with the optional C/Z Folder)
Create a new or use an existing Fold Adjustment Profile. The following steps are required for creating
a new or using an existing procedure.
Note: This option is accessed from PredictPrint Media Manager→Profiles→Fold Adjustment
Profile.
1. From the PredictPrint Media Manager main screen, select Profiles.
2. Select the Fold Adjustment tab.
3. Select New or Edit.
If you edit an existing fold adjustment, select the desired profile from the list and then select Edit.
4. Type in a new name or, if desired, edit the existing name.
5. To complete the procedure, refer to Fold Adjustment Procedures. Select the desired fold
adjustment procedure and complete the procedure for creating a new or editing an existing Fold
Adjustment Profile.
SSmmeeaarr 220088 mmmm ffrroomm tthhee LLeeaadd EEddggee
Problem
On the printed output, a smear occurs at 208 mm from the lead edge of the paper.
For more information, refer to the Advanced Stock Setup.
Solutions
1. Confirm the media being used is compatible with the press, is within supported specifications, and
in good condition.
2. Change the Adjustment of Paper Speed at Transfer setting.
• Use this feature to adjust the paper speed in the transfer unit.
• The option can be found in PredictPrint Media Manager→Stock Library→Stock
Properties→Advanced Setup→Adjustment of Paper Speed at Transfer.
• Based on the output, decrease Adjustment of Paper Speed at Transfer in increments of
0.05%. After every increment adjustment run test prints and evaluate the output to
determine if additional adjustment is necessary.
314
Xerox
®
Versant
®
4100 Press
User Documentation
Troubleshooting
To Next Page
Loading...
