Xerox Versant 4100 Press - Tab Stock

Tab Stock
Guidelines for Printing on Tab Stock
Always refer to the following guidelines before using tab stock:
• Tab Stock can be printed from all trays.
• Tabs are loaded in the tray only in the long-edge feed (LEF) direction.
• Tab stock is loaded so the straight edge of the stock is in the feed direction.
• You can load single straight collated or single reverse collated tab stock.
• Refer to the print server documentation for more detailed information on how to set up a tab job
at your print server.
• If a jam occurs while running tabbed sets, cancel the job and start again.
Loading Tab Stock in Trays 8 and 9
Load the tab stock LEF, with the side to be printed on facing down; align the straight edge of the tab
stock against the right edge of the tray and the tabs to the left.
Loading Straight Collated Tabs
Load straight collated tabs with the first blank tab cutout toward the front of the tray.
174
Xerox
®
Versant
®
4100 Press
User Documentation
Working With